Auckland

Auckland overland flow path map.

See where surface water would route across any Auckland property. Flow paths across Auckland are on a native 1 m grid, derived from the latest LINZ LiDAR survey for the region. Free to view, no login.

Check an Auckland address

Or open the map over Auckland →

What the map shows in Auckland

  • Overland flow paths in five tiers by upstream catchment, from major rivers down to small paths under 2 ha. Click a line on the map to see its tier, catchment area and grid.
  • Small paths: on the native 1 m grid, Tier 5 reaches catchments of about 0.1 ha. That is well below the 4,000 m² catchment the Auckland Unitary Plan (E36) uses to define an overland flow path, so small paths show up before they become a consent issue.
  • Potential ponding areas: low ground where water could collect before it spills on.
  • Not shown: flood plains, flood depth or velocity, stormwater pipes, culverts and other constructed drainage. It is a screening layer, not a flood hazard map.

Auckland Council's flood maps

Auckland Council publishes its flood information on the Flood Viewer and GeoMaps: flood plains (the area with a 1% chance of flooding in any year), flood prone areas, flood sensitive areas where they have been mapped, and overland flow paths. A LIM report for the property includes a natural hazards flooding map. For flood plains and flood extent, the council's maps are the reference.

Before you buy or build, Auckland Council also recommends getting a flood risk assessment report from an engineer, which sets out how flood hazards could affect the property.

Why FloodMap.nz and the council map can differ

  • Different layers. A council flood plain shows the area that could be covered in a large flood. FloodMap.nz shows flow paths and ponding, not flood extent. Comparing a flow path line with a flood plain area is comparing two different things.
  • Different terrain data. Both derive flow paths from the shape of the ground, but from different LiDAR surveys and processing. Where the ground has changed, for example new subdivisions and earthworks, a layer built on a more recent survey reflects it.
  • Pipes. Terrain-based flow paths do not include the stormwater network, so they show where water goes when pipes are full or blocked.
Buying, building or answering a council request in Auckland?

Send the address and what it's for (a purchase, a building consent, a council request). You'll get a reply within one business day saying what level of assessment fits and what it costs.

Sources: Auckland Council, Check for flood risks before you buy or build; OurAuckland, Understanding Auckland's regional flood maps (March 2026).

Questions

Is this the official Auckland Council flood map?

No. FloodMap.nz is an independent screening layer built by SAE Ltd. Official flood hazard information for a property is on Auckland Council's Flood Viewer and GeoMaps, and in the property's LIM.

How do I check if my Auckland property is in a flood zone?

Start with Auckland Council's Flood Viewer for flood plains and flood prone areas, and the LIM. Use FloodMap.nz to see overland flow paths crossing or near the site. If either shows a hazard on the property, an engineer's assessment answers what it means for the house or the build.

Why does FloodMap.nz show a flow path the council map does not?

The two layers are built from different LiDAR surveys and processing, and FloodMap.nz includes small paths down to about 0.1 ha. A line on the map is a prompt to look closer, not a finding that the property floods.