Check a Hamilton or Waikato address
Or open the map over Hamilton →
What the map shows in Hamilton and the Waikato
- Overland flow paths in five tiers by upstream catchment, from major rivers down to small paths under 2 ha. Click a line on the map to see its tier, catchment area and grid.
- Small paths: on the native 1 m grid, Tier 5 reaches catchments of about 0.1 ha.
- Potential ponding areas: low ground where water could collect before it spills on.
- Not shown: flood plains, flood depth or velocity, stormwater pipes, culverts and other constructed drainage. It is a screening layer, not a flood hazard map.
Official flood information in Hamilton and the Waikato
- Hamilton City Council: Floodviewer, with 100-year flood extent and hazard, overland flow paths, flood depressions and the Waikato River 100-year flood area. Background on the council's flood mapping page.
- Waipā District Council: flood hazard mapping, 1% AEP stormwater flood modelling for Te Awamutu, Cambridge, Pirongia, Ōhaupō and rural areas.
- Waikato Regional Council: Waikato Regional Hazards Portal, with regional flood hazard and depth, the Waikato and Waipā River 1% AEP flood extent and coastal inundation.
- Other district councils, including Waikato District, show flood hazard in their district plan maps, and the LIM for the property.
Hamilton City Council says new flood information is made available generally through a LIM, and Waipā now includes flood information on both urban and rural LIMs. Hamilton replaced its older flood hazard maps through Plan Change 14, notified in January 2025, so reports based on the earlier maps may show different flood areas.
Why FloodMap.nz and the council maps can differ
- Different layers. A council flood map shows the area that could be covered in a large flood. FloodMap.nz shows flow paths and ponding, not flood extent.
- Different terrain data. Both read the shape of the ground, but from different LiDAR surveys and processing. Where the ground has changed since a council model was built, the results differ.
- Pipes. Terrain-based flow paths do not include the stormwater network, so they show where water goes when pipes are full or blocked.
Buying, building or answering a council request in Hamilton?
Send the address and what it's for (a purchase, a building consent, a council request). You'll get a reply within one business day saying what level of assessment fits and what it costs.
Sources: Hamilton City Council, Flood mapping; Waipā District Council, Flood hazard mapping.
Questions
Is this the official Hamilton City Council flood map?
No. FloodMap.nz is an independent screening layer built by SAE Ltd. Official flood hazard information for a Hamilton property is on the council's Floodviewer and in the property's LIM.
How do I check if my Hamilton or Waikato property is in a flood zone?
Check the council's flood map (Hamilton's Floodviewer, Waipā's flood hazard maps or the Waikato Regional Hazards Portal) and the LIM. Use FloodMap.nz to see overland flow paths crossing or near the site. If either shows a hazard on the property, an engineer's assessment answers what it means for the house or the build.
Why does FloodMap.nz show a flow path the council map does not?
The two layers are built from different LiDAR surveys and processing, and FloodMap.nz includes small paths that council models often leave out. A line on the map is a prompt to look closer, not a finding that the property floods.