Wellington

Wellington overland flow path map.

See where surface water would route across any property in the Wellington region. Flow paths are on a native 1 m grid, derived from the latest LINZ LiDAR survey available for the area. Free to view, no login.

Check a Wellington address

Or open the map over Wellington →

What the map shows in the Wellington region

  • Overland flow paths in five tiers by upstream catchment, from major rivers down to small paths under 2 ha. Click a line on the map to see its tier, catchment area and grid.
  • Small paths: on the native 1 m grid, Tier 5 reaches catchments of about 0.1 ha.
  • Potential ponding areas: low ground where water could collect before it spills on.
  • Not shown: flood plains, flood depth or velocity, stormwater pipes, culverts and other constructed drainage. It is a screening layer, not a flood hazard map.

Official flood information in the Wellington region

Greater Wellington estimates that in a 1% AEP flood about 77,000 buildings in the region, around 31%, and about 197,000 people would be exposed.

Why FloodMap.nz and the council maps can differ

  • Different layers. A council flood map shows the area that could be covered in a large flood. FloodMap.nz shows flow paths and ponding, not flood extent.
  • Different terrain data. Both read the shape of the ground, but from different LiDAR surveys and processing. Where the ground has changed since a council model was built, the results differ.
  • Pipes. Terrain-based flow paths do not include the stormwater network, so they show where water goes when pipes are full or blocked.
Buying, building or answering a council request in Wellington?

Send the address and what it's for (a purchase, a building consent, a council request). You'll get a reply within one business day saying what level of assessment fits and what it costs.

Sources: Greater Wellington, Know your flood risk; Greater Wellington, LIM hazard information; RNZ, Tiaki Wai.

Questions

Is this the official Wellington flood map?

No. FloodMap.nz is an independent screening layer built by SAE Ltd. Official flood information for a Wellington property is on the stormwater flood maps for each city, Greater Wellington's flood hazard maps, the district plan and the LIM.

How do I check if my Wellington property is in a flood zone?

Check the stormwater flood map for your city, Greater Wellington's flood hazard areas and the LIM. Use FloodMap.nz to see overland flow paths crossing or near the site. If either shows a hazard on the property, an engineer's assessment answers what it means for the house or the build.

Why does FloodMap.nz show a flow path the council map does not?

The two layers are built from different LiDAR surveys and processing, and FloodMap.nz includes small paths that council models often leave out. A line on the map is a prompt to look closer, not a finding that the property floods.