Overland flow paths

What is an overland flow path?

An overland flow path is the route surface water takes across the ground when heavy rain is more than the soil, gutters and pipes can take. It follows the natural low points of the land: gullies, swales, road corridors and sometimes back yards.

Why they matter

  • Building in or across a flow path can send water into a house, or divert it onto the neighbours.
  • Councils usually require flow paths to be kept clear and not diverted. In Auckland, the Unitary Plan (Chapter E36) defines an overland flow path by a 4,000 m² upstream catchment and sets rules for buildings and other works within them. Other councils apply similar requirements through their district plans and engineering codes of practice.
  • Overland flow paths often appear in a property's LIM.

How to check a property

  1. Search the address on the map.
  2. Look for blue lines crossing or close to the site. Click a line for its tier, upstream catchment and grid.
  3. Turn on potential ponding to see low ground where water could collect.
  4. Compare with your council's flood maps and the LIM.

An overland flow path on a LIM

A LIM (land information memorandum) must include the natural hazard information the council holds about the land, including flooding and inundation. A note about an overland flow path usually means the council's own modelling or mapping shows surface water routing across or near the property.

What to do with it:

  1. Find the path on the council's flood or hazard viewer and on the map, and see where it crosses the site relative to the house or building area.
  2. Ask the council which model or map the note comes from and when it was produced.
  3. If you are buying, building or extending, ask whether the council will require the path to be kept clear, floor levels set above it, or an engineer's assessment with the consent.
  4. If the answer affects the price or the design, an engineer's desktop flood review sets out what the flow path means for the property.

What the tiers mean

TierUpstream catchmentTypical feature
T1Over 5,000 haMajor rivers
T2500 to 5,000 haRivers and major streams
T325 to 500 haStreams
T42 to 25 haMinor watercourses
T5Under 2 haSmall overland flow paths

Tier 5 goes down to catchments of about 0.1 ha on the native 1 m grid and about 0.2 ha on the 2 to 4 m grid. See the methodology for sources and limitations.

What a flow path on the map does and doesn't mean

  • It shows where water would route over bare ground. It does not say whether a property floods, how deep, or how often.
  • Stormwater pipes, culverts and kerb-and-channel are not modelled.
  • No line on the map does not mean a site is free of flooding.

Overland flow path reports

If you need something to hand to a council, a buyer or a designer, there are two levels: a map extract of the flow paths at the property with the source, method and date stated, or an engineer's review of what the flow path means for the site and what to do about it.

Need an overland flow path report for a property?

Send the address and what it's for (a purchase, a building consent, a council request). You'll get a reply within one business day saying what level of assessment fits and what it costs.

Questions

What is an overland flow path?

The route surface water takes across the ground when heavy rain is more than the soil, gutters and pipes can take. It follows the natural low points of the land.

How do I find out if my property has an overland flow path?

Search the address on FloodMap.nz to see modelled flow paths, and check your council's flood maps and the property's LIM. An engineer can confirm what a flow path means for the site.

What does an overland flow path on a LIM mean?

The council holds information showing surface water could route across or near the property in heavy rain. It is not a finding that the house floods. Check where the path crosses the site and ask the council what it requires for building work there.

Can I build over an overland flow path?

Usually not without council approval and a design that keeps the flow path working. Rules differ by council; in Auckland, Chapter E36 of the Unitary Plan sets rules for buildings and works within overland flow paths.